***shelf panel roll forming machine***

Detailed Product Description

The Technical Scheme of Shelf Panel Roll Forming Machine

1.     Forming Procedure

Notch punching---Feeding ---Forming (right and left sides)conveying---Bending (front and back sides)Collecting

2.     Machine Parts

This whole production line consists of hydraulic punching device, forming device (fold right and left sides), air-powered bending device (bend front and back sides) and collection table.

3.     The Technical Parameter of Main Parts

A.   hydraulic punching device:

a.      This part consists of two sets of moveable punching devices and one set of hydraulic system.

b.      Feed the rectangular form blank sheet to the notching device by hand and operate the device to notch by foot. After notching (the front side), feed the sheet to the accurate position according to signal. Then operate the device to notch the other side. Meanwhile, notch the front side of next blank sheet. After this, operate the feeding device to carry the notched sheet to forming device (fold right and left sides).

B.   forming device

a.      Folding two sides(the right and left sides)

b.      The number of forming racks:14

c.       The diameter of the roller axis:50mm

d.      The max width of sheet:700mm

e.      The specification of shelf panel this machine can produce

Width:150mm,200mm,250mm,300mm,350mm,400mm,450mm,500mm,600mm

Height: 45mm

Length: 1000 mm

f.        Motor power: 3kw

C.   bending machine(bending front and back sides)

a.      Feed the formed sheet to the bending machine.

b.      Make an accurate position by air-powered device, then bend the front and back sides at the same time.

c.       After the above process, the required shelf panel is finished and be collected by collection table.